Cities have important and varying incentives to transform their energy sector to all-electric with low carbon emissions. However, they often encounter a number of impediments when attempting to implement such a change. For example, while urban areas have the highest energy demand-density, cities often lack the space for installing additional energy generation and/or long-duration energy storage systems. Cities also have existing environmental issues from energy sources (e.g., pollution from dust, waste heat or noise) that make residents sensitive to energy infrastructure development. Utilizing power from conventional sources, such as natural gas, biomass and hydropower, which usually are located well outside the urban areas, also make cities more vulnerable to supply disruptions. One promising de-carbonizing energy option for cities focuses on their heating and cooling needs, which constitutes around 1/3 of U.S. and 1/2 of European energy consumption. If heating and cooling loads can be met by geothermal direct-use options, then the need for new electric sources can be greatly lessened. Despite the proven efficacy of geothermal energy as a city/community-scale heating and cooling resource, the relative newness of such applications has resulted in limited adoption. Historically, emphasis has been placed on geothermal electricity generation potential that requires higher temperature ( greater than 90 °C) resources at drillable depths, but potentially viable areas are geographically limited and typically well removed from urban centers. In contrast, low-temperature ( less than 90 °C) geothermal resources can be used directly for heating and cooling almost everywhere and are cost-effective in urban/suburban settings. In addition, the increased prominence of renewable electricity sources, such as wind and solar onto city-scale electric grids, has led to new urgency around questions of energy storage. Underground thermal energy storage (UTES), wherein surplus or waste heat is stored underground for later use, could present a long-duration energy storage solution. From October 2022 through September 2024, a transcontinental consortium consisting of geological surveys, geoscience organizations, and universities aims to develop comprehensive guidelines promoting the economic utilization of low temperature geothermal resources. Efforts will focus on providing city managers and other decision-makers with the information needed to evaluate and implement suitable city/community-scale geothermal technologies, including underground energy storage for heating and cooling. Funded by the U.S. Geological Survey’s John Wesley Powell Center, this interdisciplinary consortium will showcase tools, datasets, and scientific recommendations to accelerate the broader understanding and adoption of renewable energy systems that access geothermal resources. The collaborative research activities include standardized nomenclatures, resource descrption and characterization strategies globally. The results from these activities will be combined with climate-driven city-based urban energy needs analysis to perform energy supply/demand matching analysis. The identification of city-specific applications that would benefit from the geothermal technologies provides the basis to up-scale city-specific determinations to regional and national assessments of resource estimates. The city-scale geothermal energy research initiative will ultimately provide the synergies- and management analysis that can address their benefits, environmental impacts, regulatory frameworks, sustainability, suitability in retrofitted buildings, etc.

Press the Back button in your browser, or search again.

Copyright 2023, Stanford Geothermal Program: Readers who download papers from this site should honor the copyright of the original authors and may not copy or distribute the work further without the permission of the original publisher.