Targeting structurally controlled permeability remains a challenge in geothermal fields, because of the difficulties in characterizing subsurface structures in terms of their hydraulic behavior within the reservoir. Measurement sensitivity in combination with approximately 80% circumferential coverage (in an 8-1/2-inch wellbore) makes the Fullbore Formation MicroImager (FMI) useful for identifying subsurface structures and providing direct data on in-situ stress orientations in the formation intersected in the logged interval. Accurate, high-resolution wellbore images paired with skilled image interpretation enables fractures and faults to be characterized as open (hydraulically conductive) or closed (non-conductive, typically due to mineral deposition). Knowledge of the depths and orientations of permeable structures is beneficial at the local scale (within the logged well) and at the reservoir scale. The improved understanding of permeability distribution is used to optimize operations and improve decisions about future well targets in conventional hydrothermal projects and particularly in Enhanced Geothermal Systems (EGS) projects. FORGE well 21-31 is located in the Fallon geothermal area in Churchill County, Nevada. On behalf the US Department of Energy’s Geothermal Technologies office (via a contract with Sandia National Laboratories), this well was logged using Schlumberger’s FMI, Platform Express Triple Combo, Sonic Scanner, and Temperature and Pressure Survey tools. These logs were run in the 8-1/2-inch diameter production interval of the well (6,080-8,139 feet-MD), which is the focus of this paper. In this interval, a total of 632 m (2,059 feet) of FMI and Sonic Scanner logging results have been analyzed and interpreted. This has enabled improved classification of fractures and faults, including basic properties (direction, density/intensity, and aperture), and determination of whether the fractures and faults are open or healed. With respect to the last, the sensitivity of the measurement of borehole imaging plus the broad range of Stoneley-mode frequencies have been particularly valuable. Open fractures and faults are observed in much of the logged interval; they show a dominant strike orientation of NNE-SSW, with dip magnitudes mostly in the range of 60°-88°. Drilling-induced fractures and borehole breakouts are also observed, with dip statistics showing a dominant strike orientation of NNE-SSW for drilling induced fractures and ESE-WNW for borehole breakouts. Well 21-31 is a vertical well, thus the strikes of drilling induced fractures and borehole breakouts would tend to align with the trends of maximum and minimum horizontal stresses, respectively. The interpretation of the logging results is consistent with the predominant structural / tectonic trend in the area (most mapped faults are oriented N-S to NNE-SSW).

Press the Back button in your browser, or search again.

Copyright 2020, Stanford Geothermal Program: Readers who download papers from this site should honor the copyright of the original authors and may not copy or distribute the work further without the permission of the original publisher.