Title:

On Some Fluid-Based Monitoring Tasks Within the EU Project FracRisk (2015-2018)

Authors:

Julia GHERGUT, Horst BEHRENS, Jac BENSABAT, Chris I. McDERMOTT, Martin SAUTER

Key Words:

artificial tracers, hydraulic fracturing, single-well, push-pull, dual-tracer, EGS

Conference:

Stanford Geothermal Workshop

Year:

2017

Session:

Tracers

Language:

English

Paper Number:

Ghergut

File Size:

669 KB

View File:

Abstract:

The EU project FracRisk (June 2015 - May 2018) set out to provide decision support tools for dealing with fracking-related hazards [McDermott 2014]. It relies on top-down approaches to FEP screening in order to reduce the risk assessment job to a small set of relevant scenarios, and on efficient, FEP-overriding source/pathway/target (SPT) compartmentalizing [Sauter 2012]. Though long-established in the realm of radioactive waste management, FEP concepts prove of limited value when applied to shale-gas (SG) exploitation, whose main environmental footprint stems from low intrinsic productivity (need to frequently re-enter the wells), rather than from so-called hazards. Thus viewed, SG development is neither a significant-risk technology, nor the game changer. Artificial and natural tracers may serve several purposes in the SG context: besides assessing un-/desired transport connectivity between S and T, or within S and P, and quantifying fluid/solute/mineral mixing/dilution/transfer within/between S and P, a more significant contribution is expected from tracers in measuring productivity-critical transport parameters within S (porosity, retardation, dispersion). However, parameter inversion from measured tracer signals poses great challenges in single-well settings (as used for SG), where flow-field reversal destroys the equivalence between tracer residence times and fluid transport parameters. Recent tracer-technological innovations address inflow profiling, proppant imaging, proppant-embedded tracers; yet, to date, not a single example is known of a tracer-based estimation of a frac-related parameter. We present tracer BTC type-curve sets for assessing parameter sensitivity, and, where applicable, inverting tracer signals in terms of production-critical parameters (frac volume, fissure aperture and spacing, fluid-rock interface area), for liquid-/gas-phase tracers detectable uphole during backflow/production (no downhole instrumentation required); most of these findings prove applicable to geothermal reservoirs as well, especially the EGS type involving multiple artificial fractures. Of all target parameters, matrix porosity appears most recalcitrant to tracer-based estimation, unless reactive tracers with very special properties would become available (steerable-delay in-situ release was realized for casing-/proppant-embedded, yet not for matrix-pervading tracers).


ec2-34-227-112-145.compute-1.amazonaws.com, you have accessed 0 records today.

Press the Back button in your browser, or search again.

Copyright 2017, Stanford Geothermal Program: Readers who download papers from this site should honor the copyright of the original authors and may not copy or distribute the work further without the permission of the original publisher.


Attend the nwxt Stanford Geothermal Workshop, click here for details.

Accessed by: ec2-34-227-112-145.compute-1.amazonaws.com (34.227.112.145)
Accessed: Thursday 28th of March 2024 03:55:37 AM