Favorable Tectonic and Structural Settings of Geothermal Systems in the Great Basin Region, Western USA: Proxies for Discovering Blind Geothermal Systems

Abstract

We recently completed a comprehensive inventory of the structural settings of known geothermal systems (426 total, ≥37°C) in the extensional to transtensional terrane of the Great Basin region in the western USA. Of the known systems, ~39% are blind (no surface hot springs or fumaroles), but estimates suggest that as much as 75% of the geothermal resources in the region are blind. The density of geothermal systems and capacity of power plants correlate generally with tectonic strain rates. However, high-enthalpy geothermal activity is restricted to regions of extensional to transtensional strain, particularly the northwestern part of the Great Basin directly northeast of the dextral shear zone of the Walker Lane and pull-apart zones within both the Walker Lane and San Andreas fault system. We catalogued systems into eight major groups, based on the dominant pattern of faulting. Of the nearly 250 categorized geothermal fields, we found that step-overs or relay ramps in normal fault zones are the most favorable setting, hosting ~32% of the systems. Such areas are characterized by multiple, commonly overlapping fault strands, increased fracture density, and thus enhanced permeability. Other common settings include a) normal fault terminations (25%), where horse-tailing generates a myriad of closely-spaced faults and thus increased permeability; and b) fault intersections between two normal faults or between normal faults and transverse oblique-slip faults (22%), where multiple minor faults typically connect major structures and fluids can flow readily through highly fractured, dilational quadrants. Less common settings include: a) accommodation zones (9%); b) displacement transfer zones (5%); c) pull-aparts in strike-slip faults (3%); d) bends in normal faults (2%); and e) major range-front normal faults (1%). Pull-aparts and displacement transfer zones are more abundant in the transtensional western part of the Great Basin. Quaternary faults typically lie within or near most of the geothermal systems. Geothermal systems are rare along major range-front faults, possibly due to both reduced permeability in thick zones of clay gouge and periodic release of stress in major earthquakes. Step-overs, terminations, intersections, and accommodation zones correspond to long-term, critically stressed areas, where fluid pathways would more likely remain open in networks of closely-spaced, breccia-dominated fractures. Notably, many higher enthalpy systems are hybrids and contain more than one type of favorable setting (e.g. fault intersection within broad accommodation zone). These data can guide exploration strategies, especially for blind or hidden systems.