Through mid-December 1992, long-term flow testing of the Phase I1 Hot Dry Rock (HDR) reservoir at Fenton Hill, NM has been conducted for an aggregate of 24 weeks at near-optimum aseismic injection conditions. This period of flow testing, which began on April 9, 1992, included several reservoir shut-ins due to equipment problems and an intervening lower-injection-rate Interim Flow Test lasting about 6 weeks. With the exceptions noted above, the majority of the flow testing for that period was conducted at an average injection rate of 7.2 11s and at pressures up to 27.3 h4Pa. However, this high level of injection pressure has not produced any discernible reservoir microseismicity, indicating that we have been operating the reservoir at pressures below the threshold for fracture extension. The permeation loss from the boundaries of the reservoir at these elevated pressures has averaged about 0.7 l/s, a very low rate of water loss considering the very large volume of fractured rock (about 16x106 m3) comprising the pressurestimulated reservoir region. Temperature logging across the 350-111 production interval, centered at a depth of about 3500 m, indicates that there has been no measurable drop in the mixed-mean reservoir production temperature at the top of this interval since the time of our first temperature log in mid July. Most recently, we have conducted additional intermittent reservoir testing at higher levels of production backpressure during a period of reservoir pressure maintenance using a high-capacity rental triplex mud Pump-

Press the Back button in your browser, or search again.

Copyright 1993, Stanford Geothermal Program: Readers who download papers from this site should honor the copyright of the original authors and may not copy or distribute the work further without the permission of the original publisher.