Evaluation of Artificial Fracture Volume Based on Vented Water -- Yakedake Hot Dry Rock Test Site
- Key words
- Hot Dry Rock; Reservoir Engineering; Japan; Yakedake; Hydraulic Fracturing; Heat Exchange; Fracture Size; Acoustic Emission; Stress Wave; Fluid Volume; Pressurization; Fluid Permeation; Pore Pressure; Fracture Plan; AE Technique; Water Loss; Fracture Volu
- Location
- Yakedake, Japan
- Conference
- Geothermal Resources Council Transactions
- Year
- 1983
- Session
- HDR/EGS; Fractures; Fluid dynamics; Hydraulic fracturing
- Language
- English
Abstract
An analysis of fluid flow while hydraulic fractures are closing, has been carried out to evaluate the created fracture volume based on vented fluid measured at the wellhead, Assuming that the flow rate from the fracture into the well is approximately equal to the vented fluid per unit time, fracture volumes have been estimated form the vented fluid measured after three hydraulic fracturing operations conducted at the YAKEDAKE hot, dry rock test site, in 1981. In the case where closed fractures were created and/or fluid loss through paths from eh injection well to other observation wells were not too much, the flow rate of vented fluid calculated from fracture volume was comparable with the measured vented fluid.
Copyright 1983, Geothermal Resources Council. Readers who download papers from this site should honour the copyright of the original authors, and may not copy or distribute the work further without the permission of the original publisher.